## Description
A few devices, like the Nvidia Shield Pro 2019, are able to correctly
handle Dolby Vision Profile 7. However, when a Full Enhancement Layer
(FEL) is present, these devices effectively ignore the enhancement layer
and only apply the RPU metadata.
Due to this behavior, device capabilities are reported as not supporting
`DOVIWithEL`, which causes the Jellyfin server to strip the DV layer
entirely with a remux.
This commit adds an option to force direct play of Dolby Vision Profile
7 content, preventing the server from stripping the Dolby Vision layer
and allowing compatible devices to handle playback as intended.
### Related issues
Fixes https://github.com/damontecres/Wholphin/issues/449
### Screenshots
<img width="1280" height="720" alt="dovi7"
src="https://github.com/user-attachments/assets/849e9897-93b6-419f-a1fb-7f361f9c88dd"
/>
### AI/LLM usage
None
Co-authored-by: Ray <154766448+damontecres@users.noreply.github.com>
## Description
Adds a settings for automatic resolution switching. When enabled, the
app tries to output content at the video stream's resolution.
For example, if playing 1080p content on a 4K TV, the actual output by
the Android TV device will be 1080p.
This works in hand-in-hand with automatic refresh rate switching. So
enabling both allows for the output to match both refresh rate and
content resolution. Outputting the best refresh rate is preferred over
best resolution.
Also, shows the current display mode in the playback debug info.
### Related issues
Closes#428Fixes#531
## Description
Improves how the app restores state when auto sign in is enabled. If
auto sign in is enabled, the app will restore back to the last page.
#538 altered the app start up logic. This caused the app to reset state
more often when it goes into the background.
### Related issues
Related to #552
## Description
The major user facing change in this PR is adding back the setting to
toggle automatic sign in on or off. This controls whether to restore the
app to where you left off or go the user selection page.
If enabled: re-opening the app will restore the previous user's session
If disabled: re-opening the app will always start with the user
selection page for the most recent server, or if there isn't a recent
server, the server selection page
This also separate this setting from the PIN protection settings in
previous PRs.
### Dev changes
This PR refactors the "setup" UI (server & user selection) to be
separate from the "app" UI (the actually app content). There is now a
`NavDisplay` for the setup flow which ends with displaying the
`ApplicationContent`'s `NavDisplay`. Most of the logic is moved out of
Compose code and into a `ViewModel`.
This means to switch users/server, the `SetupNavigationManager` must be
used instead of `NavigationManager`.
### Related issues
Closes#396Fixes#376
Adds a view options button for the TV guide to allow some basic
customization:
* Show details header
* Adjust how channels are sorted
* Toggle color coding for programs
Related to #250Closes#288Fixes#439
Unfortunately, I think the PIN and automatic sign-in features require
more thought before it should be rolled out as a stable feature.
This PR disables the two settings and removes them from the UI.
See discussions in #321 and will reopen#268
Adds an advanced playback setting to enable automatic refresh rate
switching during playback
When enabled, the app looks at the available display modes, chooses the
best candidate, and attempts to switch to it. After playback ends, the
display is switched back to the original mode.
Closes#62Closes#379
Adds a settings allowing for adjusting the thickness of unstyled
subtitle outlines, if outline is enabled.
This is applied for both ExoPlayer & MPV
Closes#179
Dev note: the ExoPlayer implementation is bad code, don't write code
like this. It works though
Allows for setting a per-user profile PIN that must be entered to switch
to the user. The PIN is a sequence of directional buttons, ie D-Pad
left/right/up/down.
This PIN is per device per user per server. The PIN is stored locally
and not sent nor shared with the server. If you forget your PIN, can
still access the app using server credentials which also removes the
PIN.
Additionally, there is another setting to disable automatically sign in.
When enabled (default) the last user is automatically restored, even if
there is a PIN. If disabled, a server & user must always be selected
when opening the app.
Closes#268Closes#321
## Details
Adds options to customize how grid pages are displayed. Every grid page
can be individually customized.
The options are saved per user on the device and restored when
navigating back to the page. The pages that support it have a new button
next to the sort/filter buttons and changes are updated live.
The options are:
* Primary or Thumb image
* Aspect ratio
* Show details header w/ backdrop (similar to the one on the home page)
* Number of columns
* Spacing between cards
* Card image content scale (eg Fit, Fill, Crop, etc)
Note: the Genre tabs' grids cannot be customized yet
### Other changes
- Nav drawer now opens over top of content instead of pushing it
- Images for most cards are fetched with actual fill size
### Possible future work
* Customize Genre grids
* Add more image types, banners?
* Add similar customization options to pages with rows, eg Home page and
Recommended tabs
## Example
For example, this is a movie library using thumb images with 8 columns
and reduced spacing. It also shows the details header
## Issues
Closes#186
Related to #72
## Details
This PR contains a number of optimizations
### Images
Updates to request images with maximum sizes
The max sizes are estimates on the maximum number of pixels that will be
actually displayed. This means the server is downscaling large images
which means 1) better quality downscaling and 2) smaller images sent
over the network and cached
This should mean slightly better quality images and more images that can
be cached locally
### Paging
Reduces network calls when fetching paginated data, ie grid pages and
some rows. This PR combines the total record count & first page queries
which slightly reduces total time to load paginated data.
Additionally, on movies/tv show recommended pages, the rows now only
fetch a limited number of items (same as number on home page). While
they previously fetched using pagination, there is an overhead required
to paginate requests, so this is slightly faster.
### Async recommended fetching
On movies/tv show recommended pages, the rows are now fetched completely
separately from each other. Previously, the rows were requested
separtely, but each was only added to the UI in order as each completed.
Now they will add as the data arrived.
Note: Top unwatched TV shows is still very slow on `10.11.x`, see #204
### Image cache
The local, on-disk image cache size is increased from 100mb to 200mb.
Combined with the smaller images, this covers about 1500-2000 poster
images, but will vary by server.
The cache size is now also configurable in advanced settings from 25mb
to 1000mb. Additionally, you can see how much of both the disk and
memory caches are in use.
## Issues
Closes#330
Related to #120
Adds a toggle to increase the verbosity of the app logs for
release/production builds
Most users won't need to use this, but it can be helpful when [gathering
app
logs](https://github.com/damontecres/Wholphin/wiki/Gathering-app-logs)
to report an issue.
Adds a subtitle style option to set the margin below unstyled subtitles.
This is roughly the percent of the screen below the subtitles. It
applies to both ExoPlayer & MPV.
Also fixes font & background opacity not being applied in some cases.
Fixes#225Closes#178
A real implementation for combining the `Continue Watching` and `Next
Up` rows on the home page.
It requires a query for every next up item, so it could become slow
especially for many items and larger servers. The app makes a best
effort to cache the information.
The order is determined by querying each episode in next up to associate
it to its immediately previous episode's last played date. Then both
continue watching & next up items are reversed sorted by the last played
data. So this only makes sense if you watch series in order.
Closes#19
Experimental MPV player backend
Related to #14, #22, & #85
You can switch to MPV in advanced settings and toggle using hardware
decoding or not.
This uses code and buildscripts from
https://github.com/mpv-android/mpv-android, plus other third party
libraries to build MPV
Closes#152
Adds a setting to enable one-click-pausing via the D-Pad center button.
It is disabled by default.
If enabled, when the video is playing, it will be pause and show the
controls which is just like pressing the Pause or Play/Pause button.
If enable, when the video is paused and controls is not showing, it will
resume playback including using the skip back on resume setting.
Closes#154
Adds a settings to show the current time in the upper right corner.
If enabled, it will also show the end time for the playback on the
overlay.
Adds an option to the show the next up during the end credits (outro)
instead of at the very end of the video.
The next up pushes up from the bottom and the video scales down to fit
above.
Still a WIP though
### Sample screenshot
<img width="1280" height="771" alt="next_up_credits Large"
src="https://github.com/user-attachments/assets/9a03d0ec-325d-4efe-a28e-51270ddaaa89"
/>
Closes#95
Adds a setting (defaults to enabled) to automatically go to a page when
the navigation drawer item is focused after a brief delay.
Basically, if you open the left nav drawer, and scroll down to "Movies"
after a brief delay (600ms), the app will switch to the Movies page
without having to click.
It can be disabled in advanced settings.
Related to #103
Adds ffmpeg decoder module to support a few extra audio formats such as
AC3, EAC3, DTS, & TrueHD.
This increases the apk size by about 5.4mb (release 17.4mb->22.8mb), but
definitely worth it for the added support.
Adds ability to send app crash reports to the last connected server. The
app prompts you before sending. There is an advanced settings to disable
this as well.
Additionally, there is an advanced settings button to send the app logs
to the current server.
The resulting reports can be found on the server's web UI under
Dashboard->Logs
If sharing the logs, make sure there's no private information present!
Gathering a bunch of smaller changes into one PR
### Changes
* Changes the behavior of the "combine continue watching & next up" to
apply only to TV Shows which basically makes the 'Continue Watching'
just movies and 'Next Up' just TV episodes
* Banner card (Series & Home pages) will stretch images to fit
* Close the "more" nav item if navigating to a non-more one (from #60)
* Fix episodes not updating/marked played when returning to series page
after playing multiple episodes
* Don't show the Intro/Outro skip button the Next Up dialog is showing
* Always should black background for playback, even when loading
Adds support for customizing the items listed on the left side
navigation drawer menu. Each item can be toggled on/off in settings.
The hidden ones are still accessible under "More" on the nav drawer,
which only appears if some items are hidden.
Additionally, if any of menu items are hidden, their "latest" content
will not appear on the home page.
The setting is stored per user profile.
Adds a setting to configure pass out protection which, when enabled,
will stop auto playing next up episodes if the user hasn't interacted
with the app within the configurable 1-3 hours.
Fixes#10
Adds toggles to disable direct play of AC3 audio, ASS subtitles, and PGS
subtitles. Also a toggle to force down mixing audio to stereo.
This copies the behavior from the official client. I'm not sure if there
is a way to determine if direct playing AC3 is possible because it can
depend on devices other than the Android TV device such as a sound bar.
So it's up to the user to toggle off support if necessary.
Attribution: This PR uses on [code from the official
client](c775603df4/app/src/main/java/org/jellyfin/androidtv/util/profile/deviceProfile.kt).
